Every department in the shop, from one record.
Selling, the schedule, materials, the shop floor, the field crew and the money, with Ed on every screen. All of it is in every plan, for everyone in the shop.
See it slipping, and see it coming.
Most shop software tells you what you sold last month. ExpressFab reads your own quotes, jobs, invoices and stock and tells you what's about to happen, biggest dollars first, while there's still time to act. It's in every plan.
A builder gone quiet
A builder, designer or dealer who hasn't sent work in longer than they usually go. Flagged while there's still time to call.
Paying slower
A customer paying slower than they used to, or more than 45 days late, with what they owe beside it.
Quotes going stale
A quote out ten days or more with nobody following up, and the reason you lose most often.
A date about to slip
A job that's late, blocked, or stuck in a step twice as long as jobs usually take.
Over what it was quoted
A job costing more than its quote, while it can still be fixed or billed.
A thin backlog
Less than three weeks of sold work not yet built, or a shop booked more than eight weeks out with room to raise prices.
Worth chasing
A trade customer sending more quotes than usual, a quote likely to close, and past customers nine to eighteen months out.
What to do first
Ask Ed "what's slipping?" or "what should I do first this week?" and get the list, biggest dollars first.
Nothing is guessed from outside. It reads what your customers and your shop have actually done, and shows you the pattern early.
From the first call to a signed quote, the same day.
The Pipeline
Every lead with who it came from and the next step, and a forecast of what's likely to close.
Draw it
Straight run, L, U, island or vanity. Sides as wall, edge, backsplash or full height, cutouts on each piece, and the picture prints on the quote.
DXF from your templater
Bring in the file from your laser or photo templater. Closed outlines become pieces and holes become cutouts.
Signed online
Customers sign quotes, change orders and sign-offs by link or in person. No other account is needed.
Each customer's own page
Their jobs and the step each is at, what's waiting to be signed, invoices to pay, documents and messages.
Program orders and builder lots
A store's measure orders or a builder's lots, many jobs at a time. Forward the order email and the orders are read in for you to check.
Promise dates you can keep.
The schedule knows how much each crew and machine can do in a day, and whether each site is ready.
Capacity
Set what each crew and machine handles in a day. The grid shows the next three weeks: amber at 85% full, red when it's over.
Promise dates
Every quote shows If they sign today: the earliest dates the shop can keep, from what's already booked. Pick a day that's too full and it tells you the first day that fits.
Ready or not
Every step that needs something first has a checklist, and every item has an owner: your shop, the customer or the builder.
The no-go rule
A job can't move into the shop until the checklist from the field is complete. A manager can release it, with the reason kept on the job.
Wasted trips
When a site isn't ready, the crew taps Site wasn't ready. It lands on the customer's record, so you know who costs you trips.
Drag and drop
Move a job to another day or another step by dragging it, with a mouse or a finger on a tablet.
Every slab, every remnant, and what to buy next.
Slab by slab
Each slab with its material, color, size, lot and bundle, the supplier's tag, where it is in the yard and a photo.
Held for a job
Hold a slab the day it's picked. When it's cut, the job's cost gets the stone and the remnant gets its own record.
Remnants by size
Search what's on the rack by size and color. The radar points out remnants that could close small open quotes.
QR tags
Print a tag for every slab and remnant. Scan it with a phone to see what it is and where it belongs.
Purchase orders
Anything short for sold jobs shows on one list and becomes a purchase order. Receive it and the stock is there.
Your slab yard, live
Show the yard and your remnants on your own website, kept up to date from your records, with an Ask about it button.
Know where every job is, without walking the floor.
The jobs board
Every open job as a card in its step. Drag a card to move it. A step with open checklist items asks first.
Travelers with a QR code
Print a traveler for each job. Anyone on the floor scans it to say where the job is and move it on.
The cut list
What gets cut, on which machine, in what order. Your saw or CNC operator works from this list.
Time by station
People clock on at their station. The hours go to the job's cost and to reports by station and by person.
Equipment and maintenance
Every saw, CNC, edgebander, booth and truck, each with the usual maintenance for its kind and a log of what was done.
Remakes and callbacks
Log each one with its cause and what it cost. Most shops have never seen that number.
The crew's day, on the phone in their pocket.
My day
The day's stops in driving order, with directions, the site contact and whether the site said it's ready.
The checklist
Tick boxes, typed answers like the sink model, photos and the customer's signature with a finger. It all saves to the job.
On my way
One tap tells the customer how many minutes out the crew is, by text or email.
No signal? Keep going
Answers, photos and signatures save on the phone and send themselves when there's signal again.
From the deposit to the books, with nothing retyped.
Deposit, progress and final invoices
The deposit invoice is offered when the quote is signed and the final one at sign-off. Ready to bill catches anything skipped.
Pay online
Customers pay by card or bank transfer from the email, the statement or their own page, straight to your own Stripe account.
QuickBooks Online and Xero, live
Invoices and payments go over by themselves. Customers, vendors and items come in from QuickBooks and stay in step.
The cash forecast
What's likely to come in, week by week for eight weeks, moved by how late each customer really pays.
Job costing
Material, purchases, crew hours and shop hours against the estimate, with the margin for every job.
Change orders
Write it, price it from your list and send it to sign before the work is done. The job's value follows.
Commissions and installer pay
Worked out on money that came in, and on square feet or jobs installed. Reports works out what's owed; it doesn't run payroll.
One record means one true picture.
Today
Each person's start of the day, made of cards for their role: the owner sees the money and the risks, the crew sees their stops.
Overview
Sold this month, quotes out, jobs in the works, jobs late or blocked, and what's owed, on one screen.
Reports
Jobs finished and on time, what was sold by month and by person, margins, hours by station, the backlog ahead of each crew, and commissions.
Log it
A button on every page for what just happened and what's next. The office, the floor and the crew read the same note.
More work from the customers you already have.
Marketing with Ed
Ideas from your own records, like quotes with no answer. Ed writes the email and you send it.
Review requests and resealing
A review request the day after sign-off, and a resealing reminder a year after the job.
A website for your shop
A site built from your records, or the pieces (quote request, remnants, slab yard) to add to the site you have.
Ask Ed. On any screen, at any hour.
Ed is built into every plan. It knows the manual, your settings and your own records.
How do I...?
Ask in your own words: "How do I bill a deposit?" Ed answers with the steps and a link to the right screen.
What's going on?
"Which jobs are late?" "What does Hillside owe?" "Who's on install tomorrow?" Ed reads your records and tells you.
Set it up from my files
Hand Ed your customer list, vendors, price list and open balances all at once. It says what each file is before anything is saved.
Teach Ed your shop
Give Ed your warranty, care guide and handbook, answer a few questions, and correct it when it's wrong.
Everyone signs in. Each person sees what their job needs.
Eight roles
Owner, office manager, sales and estimating, production manager, shop floor, field, bookkeeper and read-only. Change what any role can see.
Two-step sign-in
A six-digit code from an authenticator app after the password, for one person or required for the whole shop.
Compliance
The safety and legal programs usual for your trade, what's due, the training records, and a packet for an inspector.
Team messages
Message one person or a whole team from any screen, with the job, quote or invoice attached as a card anyone can open.
Send your next quote from ExpressFab Stone.
14 days free. No card. Everyone in the shop included.